Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterSingle Car Door in Enterprise, NV
A single car door installation in Enterprise typically runs $850 to $1,600 for a standard 8×7 or 9×7 door, with insulated steel landing in the middle of that range and wood or carriage-style pushing toward the top. If you’ve got a one-car bay – and most of the houses off Blue Diamond Road and up near Mountains Edge have at least one – we handle the whole job: measuring, ordering, hauling off the old door, and setting the new one on new springs and track. Call (833) 620-7107 and we’ll quote it on the phone.
We do this work under our Garage Door Installation service, which covers everything from a single bay to a full multi-door replacement. If you want the view from the parent page first, that’s the place to start.
When You Need Single Car Door
Most folks don’t wake up planning to buy a garage door. Something pushes them into it. Here’s what we hear most in Enterprise:
- Dents that won’t come out. A one-car door is narrower, so there’s less room to swing wide. A bumper kiss at 5 mph leaves a crease that a panel replacement can’t fully hide. Past three or four panels, the math favors a new door.
- The door is past its second spring. Springs are rated in cycles, and a single door that’s been cycling twice a day for 15 years is past 10,000 cycles. When we’re out for a spring job and spot rusted hinges and a creased bottom section, we’ll tell you straight.
- Insulation or security gaps. Old single doors are often the thinnest, hollowest panel you own. If your garage doubles as a workshop or you can hear traffic from the expressway clear as a bell through the door, an insulated Clopay or Amarr door changes that.
- You’re updating the house. A single bay is a small square of curb appeal that’s easy to overlook. New doors in a carriage style from Wayne Dalton or Amarr can make a tired 1990s elevation look current.
- The old door won’t hold its hold. If it’s drifted, unbalanced, or the opener is straining, the door itself may be the problem – not the opener. If the opener is straining, the problem is almost never the opener.
- You’re converting a two-car to a single. A common move: walling off half the garage for storage or a room. We measure and set the new opening to match.
Our Single Car Door Process
- Phone quote with Otto. You call (833) 620-7107. A live person answers – usually Otto himself. He’ll ask the door width, the height, what brand is on it now, and whether it’s wood, steel, or aluminum. That’s enough to get you a real number.
- On-site measurement. We come out, measure the opening, check the headroom, look at the track and spring setup, and confirm the quote. Upfront pricing, and it does not change between the phone and the driveway.
- Door selection. You pick from Clopay, Amarr, Wayne Dalton, or whatever line fits your budget. Single doors come in 8×7, 9×7, and 8×8 most often – we’ll tell you what will fit your opening without trim work.
- Removal and disposal. We take down the old door, springs, and track, and haul it off. No pile in your driveway.
- Installation. We set new track and springs rated for the door’s weight and test the balance by hand before the opener touches it. A door is 200 pounds riding on two springs. Respect it.
- Walkthrough and 90-Day Done Right Promise. We cycle the door with you, hand over the paperwork, and leave the promise in writing on the invoice. If something’s off in 90 days, one call brings Otto back.
Single Car Door Pricing in Enterprise
Here’s what single car door work actually runs in Enterprise. Numbers below are installed, old door hauled off, springs and track included.
| Job | Typical range |
|---|---|
| Standard non-insulated steel 8×7 door, installed | $850 – $1,150 |
| Insulated steel 8×7 or 9×7 door, installed | $1,050 – $1,450 |
| Carriage-style or raised-panel single door, installed | $1,350 – $1,900 |
| Wood or composite single door, installed | $1,700 – $2,600 |
| Spring replacement on a single door | $180 – $290 |
| Panel replacement (per section) | $150 – $350 |
What moves the price: door size (an 8×8 is taller than an 8×7 and costs more), insulation value, window inserts, brand, whether the track and springs need replacing, and haul-away. A door that goes from non-insulated to insulated is usually a few hundred dollars, and in our desert heat it’s the upgrade homeowners talk about after the fact. You’ll get a written estimate before we order anything. And if you’ve got another estimate in hand, we’ll give you a free second opinion on it – no trip charge inside Clark County.
What brands we’ll quote
We work with all the majors, so you’re not locked into one line. Clopay and Amarr are the two we end up quoting most on single bays – solid, honest doors and available in the styles people around Enterprise are asking for. Wayne Dalton runs a little leaner on price without giving up much. Craftsman and Raynor are also in the mix if that’s what’s on the rest of your house. We’ll match the look and tell you when one line is the better buy.
FAQs – Single Car Door
How much does a single car door cost in Enterprise?
A standard single car door installed in Enterprise runs $850 to $1,150 for non-insulated steel and $1,050 to $1,450 for insulated. Carriage style and wood push higher. Call (833) 620-7107 for an exact quote – estimates are free, and the number holds at the door.
Can you install a single car door the same day?
No – a new door has to be ordered. Lead times on most Clopay, Amarr, and Wayne Dalton single doors are one to three weeks depending on the style and color. Emergency repairs, spring jobs, and openers can often be handled same day or next day. Call and we’ll tell you what’s realistic.
Is it cheaper to repair or replace a single car door?
Usually cheaper to repair if the door is under 10 years old with just a ding or two. Once you’re past two panels, or the door is over 15 years and the springs are due, replacement is the better spend. We’ll quote both and let you decide – we don’t push the bigger job.
Do you work on the Springs and openers too, or just the door?
We handle the whole system – door, springs, track, and opener. That’s why we can tell you whether a bad-sounding door is a door problem or an opener problem. Spring work is genuinely dangerous; a wound torsion spring carries serious stored energy and we treat it that way. We don’t recommend DIY on springs or cables, and we don’t walk homeowners through it over the phone. That’s a job for someone trained and equipped for it.
Do you offer any discounts on a single door install?
Yes – $40 off any repair over $200, a permanent 10% Senior and Veteran discount, and no trip charge inside our county. If you’re comparing an estimate from another outfit, we’ll give you a free second opinion on it in writing.
If you’re ready to price a single car door in Enterprise, or you just want someone to look at the old one and tell you the truth about it, call (833) 620-7107. A live person answers, we quote on that call, and the number doesn’t move when we get to your driveway. Background-checked, uniformed technicians trained across Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. We’ve been locally owned and owner-operated since 2004, and if you’re wondering why that matters, take a look at the rest of our Garage Door Installation in Enterprise work first. We’re happy to be the second opinion.
Written by the team at Otto’s Garage Door Enterprise, serving Enterprise.