A Otto's company - serving Enterprise, NV

Craftsman Cable & Drum Replacement in Enterprise, NV

Raised-panel steelRaised-panel steel
Carriage houseCarriage house
Modern flushModern flush
Full-view glassFull-view glass
LiftMaster openersLiftMaster openers
Chamberlain openersChamberlain openers
Every visit starts with

Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included

We have financing partners for your new garage door*On approved credit; ask us about your options

You get a price before we start. It does not change when the pro arrives.

Get your free estimate

Craftsman Cable & Drum Replacement: The Enterprise Owner’s Guide

Craftsman-compatible cable and drum replacement in Enterprise runs $130 – $250 installed, and most jobs are done same day because we keep these parts on the shelf. A live person answers the phone around the clock, so you get a real number before anyone heads your way. If you’re reading this with a crooked door and a cable hanging loose, you’re in the right place.

Call (833) 620-7107

Most Enterprise owners find out the hard way. The door comes down a little crooked one morning, then a bang, then a metal cable coiled on the floor like a dropped snake. Sometimes it starts smaller: the door drags on one side, the opener strains, or a drum starts grinding against the track. That’s the cable letting go, and it’s worth fixing before the door drops on a car or a foot.

Which Craftsman Models This Applies To

Craftsman garage doors were built by several manufacturers over the years, and the same door design shows up under different series names. The big compatibility gotchas are cable diameter and drum size. Standard residential cable is 1/8 inch on most Craftsman doors, but heavier double-car doors often take 5/32 or 3/16, and the drum has to match the cable thickness or it will chew through itself in a few months.

To identify your door, look for the sticker on the inside of the door panel or the back of the track. It usually lists the model and the door weight. If you can’t find it, measure the cable with calipers and note the drum diameter. Any reputable parts supplier will match that to the right replacement.

On OEM versus aftermarket: Craftsman branded parts are getting harder to find new, and prices on originals have crept up. A quality aftermarket drum and cable kit from a known maker is usually a better value and just as reliable. We aren’t affiliated with Craftsman, but we’ve been matching parts to these doors since 2004, and we won’t sell you a kit that doesn’t fit.

Explore

Styles & brands we work with

  • Raised-panel steel
  • Carriage house
  • Modern flush
  • Full-view glass
  • LiftMaster openers
  • Chamberlain openers

Signs Your Craftsman Cable & Drum Replacement Is Failing

Most cable and drum failures in Enterprise announce themselves before the door drops. Watch for these:

  • The door hangs crooked. One side drops lower than the other. That usually means a stretched or frayed cable on the low side, or a drum that’s slipped on the shaft.
  • A cable is visibly frayed or broken. Even one broken strand is a red flag. That cable has lost most of its strength, and the drum can bind and rip the rest loose.
  • The drum grinds or squeals when the door moves. A worn drum, a dry bearing, or rust on the shaft. Left alone, that grinding will eat the cable.
  • The opener labors or reverses for no reason. The door is out of balance and the opener is fighting it. The opener is almost never the real problem here.
  • The door slams down hard or feels heavier than usual. That’s a cable or spring issue, and it’s the most dangerous stage. Stop using the door and call us.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In Enterprise, cable and drum replacement runs $130 – $250 installed. The range covers the part itself, the labor to fit it properly, and a balance check before we leave. Double-car doors and doors with heavy lifting hardware sit at the top of that range.

Item Price Range
Cable & drum replacement (one side) $130 – $200
Cable & drum replacement (both sides) $180 – $250
Related cable repair $130 – $250

We quote the number on the phone and hold it at the door. If we find something else while we’re in there, you hear about it before we touch it and pay nothing extra without your say-so. The work comes with our written 90-Day Done Right Promise. That means one call to Otto brings him back, no runaround.

DIY or Call Us?

Here’s the honest line. You can safely check for a frayed cable, a crooked door, or a drum that grinds, and you can call us to describe what you see. What you should not do is loosen the drum, disconnect the cable, or reach into the torsion system. A door is 200 pounds riding on springs and steel cable, and a loaded cable under tension can snap and whip with enough force to break a hand or take an eye.

For this part, the risk isn’t worth it. We’ve seen Enterprise homeowners try, and the damage usually costs more than the repair. Call (833) 620-7107 and we’ll tell you what it likely is and what it costs before we come out. Free estimates, and no trip charge inside the county.

FAQs

Need Garage Door help nationwide? Licensed & insured · 30-60 min response · free estimates
Call (833) 620-7107
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Otto's Garage Door Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch