Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateClopay Torsion Spring Replacement: The Enterprise Owner’s Guide
We replace Clopay torsion springs in Enterprise for $180 to $340 installed, and yes, we can usually get to it the same day. If your door won’t lift, or it bangs down like a dropped piano, the spring is the first thing to check.
Most Enterprise owners find out this way: they hit the button, the opener groans for a second, and nothing happens. Or there’s a crack like a rifle shot from the garage, and suddenly the door is dead weight. A Clopay door is a balanced machine, and when a torsion spring breaks, that balance is gone. Your opener isn’t strong enough to lift a 200-pound door on its own, so it just gives up. If your vehicle is sealed inside, call us at (833) 620-7107. A live person answers around the clock, and we’ll quote it right on the call.
Which Clopay Models This Applies To
Clopay builds everything from builder-grade steel doors to their premium Coachman and Gallery collections, and the torsion spring assembly is the heart of all of them. This isn’t a universal part. The right spring depends on your door’s exact weight, its height, and the number of cycles it was engineered for. A two-car steel door needs a different spring than a single-car wood-composite door of the same width.
Here’s the gotcha: two doors from the same model line can take different springs if one has a heavier glass package or an extra layer of insulation. That’s why we don’t guess. We measure the wire diameter, the inside diameter, and the length of your existing spring, and we check the door’s weight rating. If the label is still on the door, it sometimes lists the spring spec. Often it’s faded or gone. On a 20-year-old door, measuring is the only reliable path.
For OEM versus aftermarket: Clopay doesn’t make its own springs anymore than Ford makes its own oil filters. The springs are made by spring manufacturers to a spec. A quality aftermarket torsion spring, matched to your door’s weight and cycle rating, is a sound replacement. We use springs rated for the load, not the cheapest one on the shelf, and we tell you what we’re installing before we start. We’re an independent service provider, not affiliated with Clopay, so our loyalty is to your door, not a brand catalog.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Signs Your Clopay Torsion Spring Replacement Is Failing
Springs don’t fail gracefully. They give warnings, and if you know what to look for, you can catch a problem before it strands your car.
- A loud bang from the garage. That’s the sound of a torsion spring snapping. The winding cone can shift, and the door goes heavy instantly. If you hear it, stop using the opener.
- The door feels impossibly heavy when you lift it by hand. A balanced door should lift with one hand. If it feels like dead weight, the spring has lost tension or broken, and the opener is doing all the work.
- The door goes up a foot and stops. The opener strains, the motor hums, and the door barely moves. This is a spring problem, not an opener problem. Replacing the opener won’t fix it.
- A visible gap in the spring coil. Look at the spring above the door (the one on the shaft, not the ones on the side tracks). If you see a clean break or a gap, it’s done.
- The door slams down instead of lowering smoothly. A spring under tension acts as a brake. When it loses that tension, gravity takes over, and the door drops hard. That’s hard on the panels and the opener.
Enterprise heat is hard on springs. A garage that hits 110 degrees in July and dips toward freezing in January cycles that metal through a wide temperature swing every year. We see more spring fatigue on doors that face west and bake all afternoon.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Enterprise, a Clopay torsion spring replacement typically runs $180 to $340 installed. That’s the spring, the labor, and the safety check. The price depends on door weight, whether it’s a single or double door, and how accessible the torsion shaft is.
| What drives the price | Typical range |
|---|---|
| Single-car Clopay door, standard spring | $180 – $260 |
| Double-car Clopay door, heavy-duty spring | $250 – $340 |
| Pair of springs (often replaced together) | $320 – $420 |
We quote before we start, and the number doesn’t change when we get there. That’s not a slogan; it’s how we’ve done it since 2004. The 90-Day Done Right Promise is written on every invoice. If something’s not right, you call and we come back. On a spring job, we also check the cables and the rollers while we’re in there, because a spring that failed at 15 years often takes a cable with it. If we find something else, we’ll show you and give you a price before we touch it.
DIY or Call Us?
Here’s the honest line: you can safely look, but you should not safely wind. A torsion spring is under enough tension to break a wrist or worse if it lets go while you’re working on it. The winding bars alone can become projectiles. This is one of the few garage door jobs where the risk is genuinely serious, and no YouTube video makes it less so.
What you can do safely: check the spring for a visible gap, lift the door by hand to see if it’s heavy, and listen for the bang. That’s it. Don’t try to adjust the winding cone or replace the spring yourself. A door is 200 pounds riding on two springs; respect it.
If you’re in Enterprise and your Clopay door is down, call us at (833) 620-7107. Calls are answered by a live person 24/7, often Otto himself, and he’ll quote the job on the call and hold that number at the door.
FAQs
Most Clopay torsion springs are rated for 10,000 to 20,000 cycles, and one cycle is one open-and-close. If you use your door four times a day, that’s roughly 7 to 14 years. In Enterprise heat, we see them fail on the shorter end more often. Call (833) 620-7107 for an exact quote on a replacement.
No. A broken torsion spring can’t be welded or re-tempered back to a safe working state. Once the coil cracks, the tension is gone, and the only fix is a new spring matched to your door’s weight. Call (833) 620-7107 so we can get the right one ordered for your Clopay door.
A single spring replacement usually takes 45 minutes to an hour and a half, depending on the door and whether we’re replacing one or both. We clean up and test the balance before we leave. Most Enterprise jobs are done in one visit.
We match the spring to your door’s wire diameter, inside diameter, and length, then order from a spring supplier, not a generic shelf part. If it’s an in-stock spec, we can often have it the same day. If it’s a specialty Clopay spec, we’ll tell you the lead time before you commit. Call (833) 620-7107 and we’ll give you the timeline and the price up front.
Written by the team at Otto’s Garage Door Enterprise, serving Enterprise and nearby areas.